manualshive.com logo in svg

Magna-Matic MAG-8000 Series, Руководство по эксплуатации, Страница: 28 / 28

Поделиться
Скачать
Magna-Matic MAG-8000 Series Скачать руководство пользователя страница 28

WARRANTY

This warranty is extended only to MAGNA-MATIC’s com-

mercial customers.  To protect the quality of this tool, every 

step in its manufacture has been carefully controlled.  It is 

constructed of only the finest materials by skilled crafts

-

men who take pride in their work.  MAGNA-MATIC CORP. 

warrants the tools manufactured and/or repaired to be 

free of defects in material and workmanship for a period 

of 365 days after purchase.  Any tool or part proved to 

MAGNA-MATIC’s satisfaction to be defective during that 

period will be repaired or replaced at MAGNA-MATIC’s 

option if returned prepaid.  MAGNA-MATIC’s sole obliga-

tion and your exclusive remedy under this warranty shall 

be limited to such repair or replacement.  In no event shall 

MAGNA-MATIC be liable for any consequential or incidental 

damages.  This warranty does not apply to parts (motor 

& grinding wheel) not manufactured by MAGNA-MATIC or 

failing due to ordinary wear, subjected to abuse, accidental 

damage, improper operations, maintenance or repair, or to 

other damage by circumstances beyond MAGNA-MATIC’s 

control.

This warranty is exclusive and in lieu of all other expressed 

or implied warranties including without limitation, the 

implied warranties of merchantability and fitness for a par

-

ticular purpose.

Magna-Matic Corporation

W4599 County Road IW

Waldo WI  53093
USA

Phone: (920) 564-2366

FAX: (920) 564-2368

Toll Free USA & Canada

1-800-328-1110

© 

2002-2006 Magna-Matic Corporation, all rights 

reserved

.

http://www.magna-matic.com

[email protected]

Содержание MAG-8000 Series





























Отзывы:

Нет отзывов