Magmaweld ID 400E, Руководство пользователя

Страница: 10 / 44

ID 400E
EN
www.magmaweld.com
10
USER MANUAL | KULLANIM KILAVUZU
Technical Information
TECHNICAL INFORMATION
1.1 General Information
Figure 1: ID 400 E
1- Mains Cabla Inlet 7- Current Adjustment Knob
2- ON / OFF Switch 8- Current Display
3- Remote Control Connector Inlet 9- Voltage Display
4- Earth Cable and Welding Cable Socket (+) 10- Hot Start Adjustment Knob
5-
Earth Cable and Welding Cable Socket (-)
11-
Arc Force Adjustment Knob
6- Handle 12- Welding Mode Selection Button
1.2 Machine Components
ID 400 E is an inverter type portable, tri-phase DC MMA welding machine designed to weld stick electrodes up to 6.0 mm. Due to descending charac-
teristics of the inverter technology it provides stable arc and good restriking performance. Initial striking ability of the electrodes can be improved via
Hot Start potentiometer and certain electrodes like basic electrodes which have tendency to short circuit and stick to the weld pool could be avoided
by adjusting the Arc Force potentiometer.
It can be used as a Touch-Scratch DC TIG* welder if a TIG torch with a valve is connected.
ID 400 E can also be used with long welding cables up to 25 m. Plus, wireless and cable remote control options are possible.The machine is fan cooled
and thermally protected against over heating.