Magmaweld ID 250 T DC, Руководство пользователя

Страница: 11 / 140

11 ID 250 - 300 T DC / TW DC
EN
www.magmaweld.com USER MANUAL
1-
Torch Strap
7-
Torch Control Connections
2-
Control Panel
8-
Earth Cable and Welding Cable Socket (-)
3-
Pedal Control Connections
9-
Gas Input
4-
Earth Cable and Welding Cable Socket (+)
10-
Remote Connection Input
5-
Gas Output
11-
Power Switch
6-
Parameter Adjustment Pot
12-
Line Cable Inlet
TECHNICAL INFORMATION
1.1 General Information
ID 250 T DC, ID 300 T DC, ID 250 TW DC and ID 300 TW DC inverter type, 3-phase DC TIG and MMA
welding machine. It is designed for TIG welding of metals and MMA welding up to 5 mm diameter.
It features advanced professional TIG controls such as HF start, Touch-Lift, Pre-Gas, Up-Slope, Down-Slope,
Post-Gas & Crater filling. In MMA mode, rutile, basic and cellulosic options are available. In TIG mode, 10 work
programs can be stored in memory and can be selected according to the job, giving the opportunity to
regain exactly the same weld. All welding parameters can be adjusted via the control panel and monitored via
digital displays. It can also be used with a generator that will provide the appropriate power and frequency.
It can also be used with welding cables up to 25 m long. The machine is fan cooled and thermally protected
against overheating.
Figure 1 : ID 250 T DC
11
12
10
9
1
4 8
3
5
7
2
6
1.2 Machine Components
Technical Information