MAGMATIC SIDEWINDER, Руководство пользователя

Страница: 22 / 26

OPERATION
1. Attach either of the included antennas to the MagFly module, then locate the card input slots on your
Magmatic device. Use a screwdriver to remove the slot cover for one of the input slots, then insert the
MagFly module and fasten it in place with the module’s mounting screws.
MAGFLY MODULE
2. Check the display screen on your Magmatic device. The MagFly icon should appear at the top of the
screen, as shown below.
3. Select the Personality icon on your Magmatic device’s touch screen, then select the “MagFly Set”
option to configure your MagFly module. Refer to your the
System Menu section of this manual for
detailed information.
4. Use the UP and DOWN keys to scroll to the “MagFly On/Off” option. Select this option, and switch
this setting to ON.
5. Return to the “MagFly Set” menu, and use the UP and DOWN keys to scroll to and select the “MagFly
Channel” option. Selectable values range from 0 to 14.
6. The MagFly module is now configured and ready to use. Please note, the MagFly module auto-
matically switches between sending or receiving data, depending on whether a data input signal is
detected at the device’s DMX port.
22