6a
USING GRILL WITH ON-BOARD LPG (PROPANE) SYSTEMS
Propane (LPG)
Gas Regulator
A10-225
Hose Kit
To other LPG
appliance
or use cap
Shut off
valve
Cylinder Valve
Gauge
Type 3
Valve
Solenoid
Connoisseur
Gas Grill
Typical Marine &
R.V. Application
Align valve stem key
to valve chamber
lock detent and rotate
Connoisseur
Gas Grill
Connoisseur
Gas Grill
Type 3
Valve
• Magma On-Board LPG (Propane) Valves
and Hose Kits allow Magma Grills to be
installed within a boats existing on-board,
pre-regulated low pressure LPG (Propane)
system.
• Use only
Magma Type 3 Low
Pressure LPG (Propane) Valves.
See
our
Valve Application Guide
at
www.
MagmaProducts.com
for correct valve.
• In North America use
Magma A10-225
LPG 10' Hose Kit
in conjunction with
Type 3 Valve.
Outside North America check
your local dealer for proper hose and fittings.
• A primary shutoff valve
(supplied with
A10-225 hose kit)
must be used with this
control valve at point of connection into
your system. This allows shut off of gas
supply to hose leading to grill.
Insert valve as shown in diagram above. Valve
may seem loose, this is OK. Valve does not have
to be snug-fitting to be safe or function properly.
IMPORTANT!!
• DO NOT CONNECT A HIGH-PRESSURE SUPPLY HOSE
FROM A NON-REGULATED TANK DIRECTLY TO GRILL.
Magma's grills are designed for use with small disposable propane canisters or with pre-
regulated low-pressure propane and optional low-pressure valves. Running high-pressure
propane fuel supply lines on a boat is in violation of American Boat & Yacht Council (ABYC)
guidelines and is not considered a safe application. Additionally, impurities found in larger
refillable propane tanks may clog the small orifices in the high-pressure control valve/ regulator
causing it to lose performance capabilities and eventually fail. Regulating these tanks to 1/2 PSI
and using this pre-regulated propane with the correct low-pressure valve will insure safe,
efficient performance of the grill.
