Magma P7R4, Руководство пользователя

Страница: 14 / 52

M A G M A
4
Chapter 2 Hardware Installation
Before you Begin
The power supply is auto-switching. These means that it will
automatically switch to match whatever source power you are using.
Since all products ship with a US Standard 115V power cord, you will
need to use a power cord adapter for non-US Standard 115V power
sources.
Attach PCI Expansion and Power Cable
Carefully position the Magma expansion chassis so that the supplied
PCI expansion cable will conveniently reach from the connector of the
Host Card to the connector on the back of the chassis. See your Host
Card Installation Guide for information on installing your Host Card.
Attach one end of the PCI expansion cable to the Host Card and secure
it using the captive thumbscrews on the cable.
See the Host Card
Installation Guide for more information on connecting the cable to
the card.
Carefully route the cable to the rear side of the expansion chassis and
attach it to the 68-pin connector, as shown below: