Magma ONIX, Руководство по эксплуатации и обслуживанию

Страница: 8 / 16

7
4.3 EQUIPMENT MOUNTING
Thoroughly remove any polyethylene film protecting the components and parts of the display
cabinet.
If this manual contains a Chapter with installation Instructions, follow the sequence indicated for
proper installation.
Align the cabinet in a horizontal position by adjusting the leveling feet to ensure:
•
Proper operation;
•
Smooth operation of water supply and water removal after defrosting the evaporator;
•
Noise reduction from the vibration of working parts.
Use only hand tools to fix screws when mounting glass components and parts.
We recommend installing, if necessary, mechanical protection devices adapted to the
equipment to prevent possible damage, for example, from the impact of a trolley, a polisher, a
loader, etc.
At the end of installation clean the display cabinet as described in point 6.1.
5. COMMISSIONING AND PRODUCTS PLACEMENT
The display case should only be switched on after preparation for use, which must be carried
out by qualified certified personnel
After turning on the device wait at least 2 hours before loading the products.
For devices equipped with an electronic temperature controller, follow the specific instructions
of the manual provided with the display case. The controller has factory settings. Their changes
should only be carried out by a qualified specialist.
It is important to note that this equipment is not intended to lower the temperature of products,
but only to maintain the temperature at which they are stored (in accordance with the
temperature class of the equipment).
Follow the storage instructions on the food packaging. Food products with a higher storage
temperature than that of the display case should not be stored in it.
Do not leave cooled food products in boxes or pallets for longer than the time necessary for
unloading / loading of the equipment.
Food products should be placed in such a way that no voids are formed and an even
distribution of cold air is ensured. Make sure that when you load the products, they do not block
the access of the cooled air (air intake vent).
Never exceed the maximum permissible load for each shelf specified in this manual
To optimize the operation of the equipment and keep the food in good condition, use only the
add-ons and accessories supplied with the display case.
ATTENTION! Do not use electrical appliances inside product storage compartments unless
they are of the type recommended by the manufacturer.
In case the equipment has glass shutters (optional), they should be opened and closed
carefully.
Do not use the roof of the display cabinet to store packing, spare parts and other materials.