Magma Automotive Molenheidseweg 10A 5451 HD Mill 0485-4713114 REV02
Type en drukfouten voorbehouden
1.
Monitor
2.
Camera
3.
Camera ‘pairing’ button
4.
Power connector camera DC 12 – 32 V
5.
Power connector monitor DC 12 – 32 V
Power cable:
Red = 12 – 32 V DC ignition controlled (+15)
Black = Ground
Settings [ MENU ]
Please use the buttons [MENU], [ + ] en [ - ] for changing the monitor settings.
You can make the following setting step by step : .
Pairing camera
Rotation view
Brightness screen
Contrast screen
Guidelines ON-OFF
Reset to factory default
Pairing monitor – camera How to (re)connect camera to monitor
Remark: only one 2.4G camera can be paired to this monitor !
To (re)connect the camera to the monitor, follow the below standing procedure.
1.
Press button [ MODE ] to start the pairing procedure
2.
Press the ‘Camera pairing button’ ( nr 3 in section : Connections) and keep this button pressed down
until you see the below standing ‘pop-up’ on screen with the check mark
3.
The monitor and camera are ‘paired’
