Magma ExpressBox EB3T-DB, Руководство пользователя

Страница: 24 / 72

Magma
ExpressBox 3T | Chapter 3 Verify Installation 24
Thunderbolt™ 2 Interface Card & LEDs
There are 10 LEDs on the Thunderbolt™ 2 Interface card. These LEDs are essential in checking the power status of the board.
It also serves as functional and failure indicators and helps in troubleshooting hardware problems.
When the Thunderbolt™ 2 Interface card is fully operational and with an external Display device attached , 7 solid Green LEDs
(D1,D3,D4,D5,D6,D7 and D9) are illuminated. See picture on
FIGURE T2-A .
FIGURE T2-A
If the above LEDs are not coming ON, it is an indication that your board is not getting power or the board is faulty or
defective. Please check the Standby-power cable is firmly connected to Thunderbolt™ 2 Interface card power connector (J7).
Make sure the Thunderbolt™ 2 Interface card is seated all the way in the PCIe slot. Try reseating the card in the PCIE slot.
If you reconnected an external Display device, LEDs D1 and D5 should come on immediately. Otherwise, the Thunderbolt™ 2
Interface card is not properly working or the monitor Display port cable is faulty.