3
Turbo Burner
Radiant Plate
Grill Grates
Lid Lock
“Stay Cool”
Handle
Oversized,
Balanced Lid
Outer Shell
Mount
Support Pad
Valve Chamber
Slide Out
Grease Tray
Control Valve
Regulator Type 1
Folding Legs
Single mount
through-bolt application
4 Carriage bolts, washers & lock nuts.
Note: Place washers on bolts as shown above.
CONTROL VALVE REGULATOR
•Uses standard 1 lb. disposable propane canisters (DOT-39 NRC).
•Prior to installing valve, become familiar with the valve function & graphics
on valve knob. Never force the knob. Always turn or push gently.
•Turn control valve to “lock” and install gas canister being careful not to cross
the threads. Check for leaks prior to use, by brushing soapy water solution
around threads and orifice hole checking for bubbles.
•Position valve with gas bottle as shown
(A)
. Gently insert valve stem
into valve chamber. Rotate until valve stem key aligns with lock detent
allowing valve to fully insert. Rotate gas canister down, so knob faces
you
(B)
or straight up
(C)
depending on application. Pull straight out
on valve to check that it is locked in place.
Valve will feel loose and will rotate easily. Even though the valve feels loose, it is designed
that way and will not leak. The valve was designed to be loose fitting in order to allow
safe, easy installation and removal of the propane canister and so it easily swings without
resistance to fit all applications
INSTALLATION INSTRUCTIONS
MOUNT HARDWARE
Fasteners
option.
are supplied for Single Mount
Carriage bolt,
washer & lock nut
