HOW TO ISOLATE GAS SUPPLY IN THE EVENT OF A LEAK (smell of gas):
Cylinders:
If there is a leak on your appliance (smell of gas), immediately attempt to turn off cylinder valve. Turn off appliance
control valve. Remove appliance to a well-ventilated location away from any ignition source.
STORAGE: NEVER LEAVE GAS CYLINDERS CONNECTED WHEN NOT IN USE!
Cylinders:
When you have finished using this appliance, turn gas cylinder off; wait for the flame to go out and turn the
appliance control valve off. Remove appliance control valve from appliance and store control valve in a dry, non-corrosive
environment. • Store fuel containers outdoors, in a well ventilated area, out of reach of children, never below decks on boats.
(Any indoor storage shall comply with Section 2 Minor storage and usage of
AS/NZS 1596
).
HOSES:
Only use the hose assembly as supplied with this appliance for connection to the cylinder — DO NOT USE
ADAPTORS. (RECA #719 AGA 3735 Regulator) Connections must be spanner tight per AGA requirements. Make sure gas
hose is in good condition and avoid twisting or kinking.
PACKING MATERIALS: BEFORE INSTALLATION OR USE!
• Open package containing grill and components, remove all contents.
Package contents:
• Grill body
• Valve - Located in end cap supports
• Product owner’s manual
• Remove grill from plastic bag.
• All necessary assembly instructions are detailed in the provided owner’s manual.
On Board Pre-Regulated Low Pressure Propane Systems (LPG)
Align valve stem key to valve
chamber lock detent and rotate
Gas Grill
• Orifice size for models A10-1218-2AU-3 and A10-1218-2GSAU-3 is 0.81 mm.
• The nominal gas consumption for models A10-1218-2AU-3 and A10-1218-2GSAU-3 is 9.0 MJ/H.
83-1218-2AU-3
0119
