&
Fig. 7
Clamps Open
Fig. 9
The Charging Cradle’s Quick
Release Mounting Bracket
Turning the Charging Cradle upside down, you will see a release pin on
the same side as the power cord (Fig. 5). Depressing this pin with the
index finger or (closed) ballpoint pen will release the mounting bracket
for installation. When locating and mounting the bracket, be sure that the
release pin (Fig. 6) faces in the same direction as you want the head of
the flashlight to be.
Note:
Because of the innumerable places that can be
chosen for mounting, there are no screws or fasteners supplied. Be sure
to use fasteners that give maximum holding power for repeated use.
Two mounting brackets are included for location versatility.
Charging Cradle Clamp Arms
Note the difference, in the following illustrations, between the “clamps
open” position (Fig. 7) and the “clamps closed” position (Fig. 8).
Sometimes one or both clamps (they work independently) will be
inadvertently pushed to the closed position, making it very difficult to
return the flashlight to the recharger/cradle. If this happens, simply take
thumb and forefinger and snap it back to the open position (Fig. 9).
The Charging Cradle
Fig. 5
Fig. 6
Fig. 8
Clamps Closed
Section 2
