Page 5
Caution: While converting the Folding Platform Truck between the different handle positions, take
care to keep hands out of the way of moving parts.
1. Slide the pivoting handle toward the rear of the cart to disengage the handle locking tabs from
the frame.
2. Hold the Folding Platform Truck securely with one hand on pivoting handle and the other hand
on the deck.
3. Pivot the handle slightly so that you can pull the handle upward. The handle will need to
“clear” the bottom of the handle stop before fully rotating.
4. Rotate the handle upward until it is perpendicular to the ground.
5. Slide the handle tube downward until it reaches the end of travel. The handle tube must pass
through bottom face of the handle stop to hold it in position.
6. The operator may place a foot on the main deck to hold the truck in place during folding
motion.
Unfolding the Handle
Handle Stop
Faces
C
aution: While converting the Folding Platform Truck between the different handle positions, take
care to keep hands out of the way of moving parts.
Note: The Folding Platform Truck will not fold down and lock in place if the handle is not collapsed
(see “Collapsing the Handle, next page).
1. Slide the handle tube upward until it reaches the end of travel. The handle will need to “clear”
the bottom of the handle stop.
2. Rotate the handle downward until it is nearly parallel with the side rails.
3. Slide the pivoting handle toward the rear of the cart to allow the handle to fully fold along
the side of the cart. The operator may place a foot on the main deck to hold the truck in place
during folding motion.
4. Slide the handle toward the front of the frame to engage the locking tabs on the handle with
the latch on the frame side rails.
5. Before lifting the Folding Platform Truck into the upright position for storing or carrying, please
be sure that the handle is latched securely in place on the frame.
Folding the Handle
Make sure the handle
locking tab fully engages
the frame latch.
Frame latch
Handle locking tab
REAR
FRONT