Magliner C5 Скачать руководство пользователя

Страница: 3 / 4

Step 3

Temporary bolt

placement

Insert lower bracket (C) and axle spacer (D) as shown below. Tip - it is helpful to temporarily insert a screw

through both spacers to help hold alignment BEFORE you tighten the lock nut and axle bolt. Remove this screw

after you've tightened the lock nut and axle bolt.

Then replace the lock nut and tighten to 100 120 in.-lbs. torque. Apply blue thread locker to axle bolt threads;

replace axle bolt and tighten to 50 ft.-lbs. torque.

TIP

(1/2" wrenches, 9/16" wrench, pliers, blue thread locker)

Lock

nut

Axle

bolt

Содержание C5

Страница 1: ...UCTIONS Table of Contents Parts List 2 Assembly Instructions 2 4 C5 Stair Climbers Hydraulic Brake Truck For safe efficient product use Magline recommends inspecting equipment regularly and replacing...

Страница 2: ...lease note brake caliper and brake line not shown for simplicity Step 2 Remove the existing spacers 1 2 wrenches 9 16 wrench and pliers Note These instructions are for Hydraulic Brake Trucks with the...

Страница 3: ...ld alignment BEFORE you tighten the lock nut and axle bolt Remove this screw after you ve tightened the lock nut and axle bolt Then replace the lock nut and tighten to 100 120 in lbs torque Apply blue...

Страница 4: ...iver to punch a hole through the red stripe A hole will exist in the frame For 60 frames drill a hole in the frame using a 281 size K drill bit and motor Use the hole in the top of the C5 as a guide I...