36
1�2 Risk of Death by Electric Shock
• If the device shows visible damage, you are not allowed to
put it into operation
• Never touch open cables with bare hands!
• If you work on electrical installations, make sure that
someone is nearby to help you in an emergency
• If the connection cable is damaged, it must be replaced by a
qualified person in order to avoid hazards
• Repairs on this device may only be done by qualified tech-
nical staff
Ignoring these instructions can lead to considerable dangers
1�3 Risk of Fire
• When setting up the device, ensure that the connecting
cable is not pinched or damaged
• Keep the ventilation openings clear on all sides, ensure that
there is sufficient ventilation for built-in constructions
• In case of fire, use a fire extinguisher suitable for electrical
appliances
1�4
Safe Use of Electrical Devices
• Before commissioning, compare the voltage specification on
the type plate with the available power supply
• The device may only be connected to voltage sources that
are approved for its intended use 12 V = 12 V
Connecting to voltage sources that are higher than those
specified will cause the device to blow the fuse immediately
and may destroy the device
WARNING
WARNING
ATTENTION
Содержание ASKIS PSI-10
