37
EN
3. Never immerse the coffee maker body into water or other liquids!
4. Wash the removable parts of the coffee maker with warm water and
a soft detergent, then rinse them and dry.
1. To make sure your coffee maker operating efficiently, internal piping
is cleanly and the peak flavor of coffee, you should clean away the
mineral deposits left.
2. Fill the tank with water and descaler to the MAX level (the scale
of water and descale is 4:1, the detail refers to the instruction of
descaler. Please use “household descaler”, you can use the citric
acid (obtainable from chemist’s or drug stores) instead of descaler
(the one hundred parts of water and three parts of citric acid).
3. According to the program of preheating, put the metal funnel (no
coffee powder in it) and carafe (jug) in place. Brewing water per “PRE-
HEATING”.
4. Press the ON/OFF switch, the power indicator (red) will be illuminated,
you should turn the knob to the «
»position, make sure the steam
button is on the higher position which is the « » position, when there
is water flowing out and close the pump by turning the knob to the
« » position, and waiting for a moment, the coffee maker begins to
be heated.
5. When the coffee indicator is illuminated, it shows the heating is
finished. Turning the knob to the «
» position and make two cups
of coffee. Then close the pump and wait for 5s.
6. Press down the steam button to the lower position which is the « »
position, waiting for until the steam indicator is illuminated. Make
steam for 2 minutes, then turn the knob to the « » position to stop
making steam. Press the power switch to stop the unit immediately,
make the descaled deposit in the unit at least 15 minutes.
7. Restart the unit and repeat the steps of 4-6 at least 3 times.
8. Then pressing and release the steam button to the higher position
which is the « » position, when the coffee indicator is illuminated,
turning the knob to the « » position to brew until no descale is left.
9. Then brewing coffee (no coffee powder) with tap water in the MAX
level, repeat the steps of 4-6 for 3 times (it is not necessary to wait for
15 minutes in step of 6), then brewing until no water is left in the tank.
10. Repeat the step of 9 at least 3 times to make sure the piping is cleanly.
11. When all water is in the container (cup), set the operation mode
selector to « ». Turn off the coffee machine.
1. Before removing the coffee maker for long-term storage, clean it.
2. Store the device in a cool dry place, out of the reach of children and
people with disabilities.
Storage
Cleaning mineral deposits
