Magio MG-962, Руководство пользователя

Страница: 40 / 44

ENGLISH
appliance begins to be heated until the steam indicator is
illuminated, it shows the heating is finish.
5. Remove the frothing device from the steam wand.
6. Dip the steam wand into the liquid to be heated. Turn the knob
to the
“ ”
position.
7. When the required temperature is reached, you can turn the
knob to the
“ ” position.
8. Press the power switch to cut off the power source.
CLEAN AND MAINTENANCE:
• If during the filter cleaning you find out that the openings are
blocked with ground coffee remnants, you can clean them with a
small brush.
• Clean the coffee maker body with a soft damp cloth, and then
wipe the unit body dry. Do not use metal brushes or abrasives.
•
Never immerse the coffee maker body into water or other
liquids!
• Wash the removable parts of the coffee maker with warm water
and a soft detergent, then rinse them and dry.
CLEANING MINERAL DEPOSITS
1. To make sure your coffee maker operating efficiently, internal
piping is cleanly and the peak flavor of coffee, you should clean
away the mineral deposits left.
2. Fill the tank with water and descaler to the MAX level (the
scale of water and descaler is 4:1, the detail refers to the
instruction of descaler. Please use “household descaler”, you can
use the citric acid (obtainable from chemist’s or drug stores)
instead of the descaler (the one hundred parts of water and three
parts of citric acid).
3. According to the program of pre-heating, put the metal funnel
(no coffee powder in it) and carafe (jug) in place. Brewing water
per
“PRE-HEATING”.
4. Press the ON/OFF switch, the power indicator (red) will be
illuminated, you shoul
d turn the knob to the“ ” position, make
sure the steam button is on the higher position which is the “ ”