Magio MG-490, Инструкция по эксплуатации

Страница: 21 / 24

19
1. Remove the kettle from the base (7).
2. Press the button for opening the lid (4).
3. Fill the kettle with water no lower than the «MIN» mark and no higher
than the «MAX» mark.
4. Close the lid by pressing it until you hear a click.
5. Place the kettle on the base.
6. Connect the unit to the power outlet.
7. Set the on/off button to position (I) by pressing it.
8. Wait for the water to boil and the kettle will automatically turn off, and
the button (6) will return to the starting position.
Operation
Descaling
The kettle should only be used with the base that comes with it.
Do not switch on the appliance without water.
Do not use scouring pads, abrasive cleaning agents or aggressive
liquids such as alcohol, petrol or acetone to clean the appliance.
Do not immerse the device in any liquid, rinse it under running
water or place it in the dishwasher.
Note:
»
To avoid the water to a boil, you can turn off the appliance at any
time by pressing the on/off button (6) and setting it to position (O).
Cleaning and maintenance
1. Unplug the appliance, drain the water and let it cool down.
2. Wipe the body with a slightly damp cloth, and then wipe it dry.
Method 1
1. Fill the kettle up to the «MAX» mark with a 2:1 mixture of water and
vinegar.
2. Turn on the appliance on and wait until the mixture boils and the
appliance switches off automatically.
3. Leave the mixture in the kettle for >7 hours.
4. Drain the mixture and fill the kettle with clean water.
5. Turn the appliance on and bring the water to the boil.
6. Drain the water.
Method 2
1. Fill the kettle with water up to the «MAX» mark.
2. Turn on the device, wait until the mixture boils and the device turns
off automatically.
3. Add 25-50 g of citric acid.