Magio MG-366, Инструкция по эксплуатации

Страница: 25 / 27

Operation
Attention! Be sure to push the latch off before installing
the removable panel, do not press it! Installing the panel
with force can lead to breakage of the lock!
Do not replace metal panels when the appliance is
connected to an electrical outlet.
Do not operate the appliance without installed panels.
2. Slide the panel lock on the body of the device in the direction
of the arrow on the lock, remove the metal panel. Repeat the
action with the other panel.
3. Slide the latch in the direction of the arrow shown on the
latch and install one of the three types of removable panels
(page 24).
4. The selected panel is installed in the device so that the
protrusions on it coincide with the grooves in the housing.
Release the latch. Repeat the action with the other panel.
1. Insert the plug into the socket.
2. Red indicator* will light.
3. When green indicator* will light you can start cooking.
4. Prepare materials for making a sandwich.
*Red indicator - the device is connected to the network.
*Green indicator - the heating elements are hot enough and the
device is ready for use.
For grilled and triangle sandwiches, you need 2 slices of bread
for each and the filling. Place a small amount of butter between
the bread slices and the heating panels.
Slowly and carefully press the upper heating pad against the
lower heating pad until they close tightly. Open the sandwich
maker after 2-5 minutes. The sandwiches are ready.
The cooking time for sandwiches depends on the type of
sandwich, the ingredients, and your preference.
During the cooking process, the green indicator will periodically
turn on and off. This signals that the sandwich maker is working.
Note
EN