MAGINON IPC-1A, Инструкция по эксплуатации

Страница: 25 / 64

23
In the shown example, two WiFi Network Cameras are connected to the router, one camera
named
IPCamera1 with the local network address 192.168.1.110 and a second camera with
the name IPCamera2 and the local network address 192.168.1.111.
We are now setting the external port 81 as access for the WiFi Network Camera IPCamera1 .
TCP and UDP protocols may be selected but only TCP is required. This camera is accessed
from the Internet via address http://
xxx.xxx.xxx.xxx:81 (in which xxx.xxx.xxx.xxx is the public
IP address of the router).
External port 82 is set up as access for the WiFi Network Camera IPCamera2 . The camera can
be accessed from the Internet via address http:// xxx.xxx.xxx.xxx:82 .
In order to avoid any problems, the same port should be selected for the internal and
external port of the WiFi Network Camera. To achieve this, call up the network data of the
camera using the program
supra IPCam Config and change the settings of the port to the
port of the WiFi Network Camera assigned in the router (see section 5.5 “ Setting up the
WiFi Network Camera ”).
We have produced detailed descriptions of how the port forwarding is to be set up for the
different router models. You will find these descriptions on our Website at:
http://www.ipc-info.com.
Please contact our After Sales Support if your router model is not listed.
Note:
t &OTVSFUIBUBOFYUFSOBMQPSUJTOPUBTTJHOFEUXJDF