MAGINON ipc-1, Инструкция по эксплуатации, Страница: 40 / 58

38

Automatic speeds:
specify, separately for up/down/left/right, how fast the camera head
should move when being controlled automatically.
Click “Save” to accept the changed settings. The new head settings are accepted without
rebooting the camera
6.13. Resetting
To reset the security camera to factory settings, click
“Reset now”
.
Resetting takes approximately 1 minute. Please wait until the log on is displayed in the
browser window.
6.14. Rebooting
To reboot the security camera, click
“Reboot now”
. This applies all settings made to date.
Rebooting takes about 30 seconds. Please wait until the log on is displayed again in the
browser window
Note:
• Doing this will cause all previously made settings to be lost.
• If the network settings were altered it is possible that the camera can no longer
be contacted at the current address. The camera can be located once more using
the confi guration program.
• The camera can also be reset using the RESET button on the underside of the
camera. To do this, keep the RESET button depressed for about 5 seconds.
Note:
• If the network settings were altered it is possible that the camera can no longer
be contacted at the current address. The camera can be located once more using
the confi guration program.