MAGINON FS 500, Инструкция по эксплуатации

Страница: 15 / 28

13
9. Connecting the Film Scanner to your computer
Plug the scanner’s connector cable into one of your computer’s USB ports. The power
LED on the scanner will then light up in red.
The transparency scanner will only work on a USB port that supports USB 2.0. On
desktop computers, such connection ports are usually located on the rear side. In the
case of laptops and notebooks, you may have to try out various USB ports to fi nd a
suitable one. Because the USB systems on portable computers often do not carry
suffi cient power, it may be necessary to use a USB hub with its own power supply.
Note:
• If “Error message 10” appears on the screen during installation of the scanner,
leave the unit plugged in and re boot the computer.