For the first second after power up, the indicator light 1 for #pulses for Selected
Token shows the current pulse speed setting. If this light is on, pulse speed is
normal. Conversely, if this light is o
ff
, pulse speed is slow.
To change the pulse speed setting of the iCoin from its current setting, first verify
what the current setting is by examining the indicator light 1 for #pulses for
Selected Token at power up. Then if you wish to change the current setting:
i)
Power down the iCoin.
ii)
Press and hold the Press to Set Active Coins pushbutton.
iii) Power up the iCoin while continuing to hold the pushbutton until the
indicator lights come on. The new pulse speed setting will be displayed on
the indicator light 1 for #pulses for Selected Token during this time.
9)
PREPROGRAMMED COINS NUMBER OF PULSES
Because the U.S. quarter or the U.S. $1 coin have di
ff
erent values, di
ff
erent number
of pulses will be sent to the timer depending on which coin is accepted. Normally
the number of pulses sent is fixed: 1 pulse is sent to the timer when a U.S. quarter
is accepted, and 4 pulses when the U.S. $1 coin is accepted. This setting is
regardless of whether only one or both coins are enabled. This setting can be
changed such that it is dependent on which coins are enabled. In the dependent
setting, only 1 pulse will be sent to the timer when the U.S. $1 coin is accepted if
the U.S. quarter is disabled. If the U.S. quarter is enabled then the dependent
setting operates the same as the fixed setting.
For the first second after power up, the indicator light 16 for #pulses for Selected
Token shows the current preprogrammed coins number of pulses setting. If this
light is on, the preprogrammed coins number of pulses is fixed. Conversely, if this
light is o
ff
, the preprogrammed coins number of pulses is dependent.
To change the preprogrammed coins number of pulses setting:
i)
Power down the iCoin.
ii)
Press and hold both the Press to Set Active Coins pushbutton and Press
to Select Token pushbutton.
iii) Power up the iCoin while continuing to hold the pushbutton until the
indicator lights come on. The new preprogrammed coins number of pulses
setting will be displayed on the indicator light 16 for #pulses for Selected
Token during this time.
Ensure that your timer is setup correctly based on the number of pulses that the
iCoin will send for the coins that you have enabled it to accept.
10) HINGED DOOR ACCESS
Should a bent or damaged coin become stuck in the coin acceptor, the iCoin
CP900U features full access to the internal coin path. By gently pulling back on the
Содержание iCoin CP900U
Страница 1: ...iCoin Model CP900U Electronic Multi Coin Acceptor Instruction Manual v 1 2...
Страница 2: ......
