Magiglo DUO POWER SV Series, Инструкция для пользователя, установки и обслуживания

Страница: 6 / 52

Page 2
current edition of I.S.813 which makes clear the conditions that must be met to
demonstrate that sufficient ventilation is available.
2. If provided, any purpose provided ventilation must be checked periodically to ensure it is
free from obstructions.
3. When fitting the fire in Northern Ireland (NI), purpose provided ventilation must be
provided in accordance with the rules in force.
4. In other EC countries equivalent rules in force must be used.
Flue Requirements
This product is supplied as a complete system, including all necessary flue components.
Gas Supply
1. This range of decorative gas fires are suitable for use with either Natural Gas (G20) at
20mbar supply pressure, or LPG (G31) at 37mbar supply pressure (please check
appliance data plate for compatibility).
2. A separate means of isolating the gas supply should be provided near to the appliance to
facilitate servicing. For this, an isolation valve has been supplied with the appliance.
Electrical Supply
Connection can be made using one of the following methods:
a) A fused spur providing 230v 50Hz AC, protected with 3A fuse, located adjacent to the
appliance.
b) A BS1363/A approved (three pin) plug with a 3 Amp rated fuse, can be fitted to the
power supply cable on the appliance and plugging into a suitable wall socket nearby.
The wires in the mains power supply lead on the appliance must be connected to the
plug in accordance with the diagram below.
Connect BLUE
to N(neutral)
Outer Sleeve
firmly clamped
Cable grip
Connect BROWN
to L (live)
3Amp fuse approved
to BS1362
Connect GREEN/YELLOW
to E or (earth)
Figure 1
In case the appliance needs to be isolated from the power supply (e.g. during
servicing) switch off at the wall socket and
REMOVE THE PLUG from the socket.
The electrical Installation must be carried out in accordance with The Current I.E.E.
Wiring Regulations.