Version 1.0
Page 20
13. TROUBLESHOOTING
-
The Shot Base Wireless doesn
’
t react to a remote 4/8.
This problem has multiple causes: first check if the remote is switched on (the red LED is lit and the
switch is away from the antenna) Press on one of the buttons of the remote 4/8 to send an signal to
the Shot Base Wireless, if the LEARN LED on the Shot Base Wireless blinks fast the signal is
received by the Shot Base Wireless in this case the Shot Base Wireless needs to be programmed to
the remote.How to do this view page 10 of this manual.
-
The Shot Base Wireless doesn
’
t receive any signal (no blinking LEARN LED).
When u are sure the remote is operating right and it still doesn
’
t react to the signal the are probably
multiple devices also transmitting on the frequency of 434MHz. This can cause bad or no receiption by
the Shot Base Wireless. Turn other transmitters off to use the Shot Base Wireless flawless.
-
One or more outputs don
’
t work.
Probably a fuse is burned trough. Replace the fuse by unscrewing the fuseholder and replacing the
fuse by a new 10A fuse.
-
The Shot Base Wireless is still malfunctioning after troubleshooting
Always contact your dealer or the technical service of MAGIC FX first in case of uncertainties,
questions about the Shot Base Wireless works or other issues with regard to the Shot Base Wireless.
14. TECHNICAL SPECIFICATIONS
Measurements
and weight
Length:
310mm (12.2
”)
Width:
380mm (14.96
”)
Height:
295mm (11.61
”)
Weight:
9,85 Kg (21.7lbs.)
Power
Input:
AC 230V~50-60Hz
Consumption:
400W
Fuse:
10A 250V 5x20mm
Battery internal:
Lithium Polymeer Accu 3-Cell 11.1 vdc 2200mAh
Battery Remote:
CR2032
Wireless
Frequency:
434.535Mhz
RF Output:
3 ~ 10mW
Design and product specifications can be changed without prior notification.
15. MAINTENANCE
To achieve the maximum service life of the Shot Base Wireless you must regularly clean the Shot
Base Wireless and test if it is working correctly.
Should the Shot Base Wireless not work for some reason then please contact MAGIC FX.
DANGER WARNING:
Do not replace parts yourself; always consult MAGIC FX if necessary.
16. GUARANTEE
A manufacturer's guarantee of 3 years applies to the MAGIC FX Shot Base Wireless.
-
The guarantee expires if the Shot Base Wireless is used for improper purposes and for
applications which are not stated in this manual.
-
The guarantee also expires if the machine is used incorrectly or in violation of the regulations.
-
The guarantee expires if the machine is altered without permission from the supplier.
