Magicfx FX-SWITCHPACK MFX3211, Руководство пользователя и инструкция по установке

Страница: 11 / 20

MAGICFX
®
FX-SWITCHPACK — User and Installation Manual 11
2 SWITCH SAFELY!
The MAGICFX
®
FX-SWITCHPACK has been designed and constructed in such a
manner that it can be used safely. This applies to the use, the circumstances and the
regulations as described in this documentation. Reading this documentation and
following the instructions are therefore necessary for everyone who is authorised to
work with the MAGICFX
®
FX-SWITCHPACK.
The MAGICFX
®
FX-SWITCHPACK must be used in surroundings that:
• Have a stable temperature of between -10 and 50 °C.
• Have a relative humidity degree between 20% and 90 % (non condensing).
• Are free of dust, corrosive gases and high concentrations of organic vapours.
• Are not situated in the vicinity of a source of vibration.
2.1 GENERAL SAFETY RULES
• Only authorised persons may carry out work with the MAGICFX
®
FX-
SWITCHPACK.
• Do not use the MAGICFX
®
FX-SWITCHPACK if there are people or animals in the
direct output.
• Make sure that children, unauthorised people and animals do not obtain
access to the MAGICFX
®
FX-SWITCHPACK.
• Make sure there are no freestanding objects or objects that can be damaged
by the connected machines within the output distance.
• Do not remove any safeguards, safety caps and safety symbols.
• All required safety devices must be in good condition and function properly.
• Ensure sufficient lighting of the surroundings.
• Keep the workplace clean.
• Refer to the manual(s) of the connected machine(s) for safety instructions
concerning the use of those machines.
2.2 RIGGING
Please follow the European and national guidelines for safe rigging and trussing.
2.3 CONNECTING FX-MACHINES
The voltage and frequency connected to the power input of the MAGICFX
®
FX-
SWITCHPACK are also the voltage and frequency of the switchable power outputs.
With a maximum electric current per switchable output (see Chapter 1.2 Technical
Data), a deviant input voltage or frequency may cause connected FX-machines to
not work properly. The switchable output cannot deliver the power the FX-machine
might require.