Magicfx FX-ARM CONTROLLER, Руководство пользователя и инструкция по установке

Страница: 8 / 16

8 MAGICFX
®
FX-ARM CONTROLLER
— User and Installation Manual
WARNING
Make sure the Arm cables from this MAGICFX ® FX-ARM
CONTROLLER are not connected into any products that are not
compatible with this safety device as this may damage your
hardware. Likewise, do not connect any RJ45 cables from any
other system carrying a different data protocol as this may
damage your hardware.
WARNING
Only one MAGICFX ® FX-ARM CONTROLLER can be used in a
single connected system. Connecting more than one controller
with RJ45 Arm leads can cause damage to them.
3
LET’S ARM!
3.1
CONNECT THE CONTROLLER
1 Place the controller on a stable surface in a suitable area.
2 Make sure the arm/disarm key is in the ‘OFF’ position and the e-stop button is
not pressed in.
if the e-stop is pressed in it can be released with a clockwise
quarter turn.
3 Connect the PowerCon TRUE1 power cable to the power input of the controller.
NOTICE