Version 1.1
Page 12
Now connect the CO2 high pressure
hoses of 2m to the CO2 bottles.
Connect the bottle adapters tightly by
hand or use a wrench is necessary.
5.
Place the CO2 cylinders (liquid carbon
dioxide with dip-pipe) on a flat and stable
surface.
Place the cylinders in a position so that
the opening of the valve is not in the
direction of persons, animals or objects.
Place the CO2 cylinders preferably
outside or in an area with good
ventilation and a CO2 detection system.
CO2 cylinders are pressurized containers.
Secure them by certified bottle brackets
with chains to prevent tipping of the
bottles.
4.
Connect a 3 pin DMX cable to theCO2
Dominator.
If preffered you can connect a next unit
by connecting another 3 pin DMX cable to
the DMX out connector.
Connect the other side of the DMX cable
(the male plug) to a professional DMX
controller.
Always make sure that the DMX controller
will be placed on a position from where the
operator can see theCO2 Dominator.
Check the manual of your DMX controller for
instructions and the save use of it.
3.
