Quick Start Guide
Ultra Electronics Card Systems
Page 2
MAGICARD Color Printer
Setting up your MAGICARD TURBO Color Printer
takes just three easy steps:
1.
Unpack and install the printer
A
Preparing a Location for the Printer
B
Removing the Printer from the Box
C
Checking the Package Contents
D
Install the Dye Film
E
Load the Plastic Cards
F
Cleaning the Card Cleaning Roller (sticky or tacky roller)
G
Connect the Printer to a Power Supply
H
Test the Printer Operation
I
Install the Parallel Interface Cable and Ultra Secure Key
2.
Load the supplied WINDOWS Driver software.
Jx
Install the WINDOWS Driver
(WINDOWS 3.x)
Jy
Install the WINDOWS Driver
(WINDOWS 95)
K
Printer Setup
L
Install the WINDOWS Driver
(WINDOWS NT4)
3.
Verify computer-to-printer operation.
M
Verifying Computer to Printer Communication in WINDOWS
N
In Case of Difficulty.
P
Important Cleaning procedures.
Q
LED Error Codes
Note
: The Ultra WEB site at
http://www.ultra.co.uk
contains comprehensive technical support information
including the latest downloadable software, WINDOWS Drivers, Technical Bulletins etc
Conventions
Throughout this guide, the following conventions are used to identify important
information.
WARNING
-
Warning messages indicate where personal injury could result from
not following the correct procedures
.
CAUTION
-
Caution messages indicate where damage to equipment could result
from not following the correct procedures.
NOTE
-
Notes convey important information that is identified within the text
.