Magicard 3100-0001, Руководство пользователя

Страница: 3 / 30

ID Card Printer – User Manual
3
GENERAL INFORMATION:
This document contains proprietary information belonging to Magicard Ltd. and may not be wholly or partially copied,
stored in a data retrieval system, or used for any purpose other than that for which it was supplied, without the express
written authority of Magicard Ltd. All rights are reserved.
Microsoft and Windows Vista and Windows 7, 8 and 10 are trademarks of Microsoft Corporation.
Copyright © 2011 Magicard Ltd.
Magicard Ltd. shall not be liable for errors contained herein or for incidental consequential damages in connection with
the furnishing, performance or use of this material. Magicard Ltd. reserves the right to change the content of this
document without prior notification.
SAFETY INSTRUCTIONS:
• To prevent electric shock do not remove covers.
• Do not attempt to service the printer yourself.
• There are no user serviceable parts inside (either printer or dye film). In the event of malfunction, contact your
printer/consumable supplier.
• This product is only to be used with the Power Source supplied at point of purchase.
• Take care not to spill any liquid on the printer.
• When handling the printer avoid touching the printing edge of the Thermal Print Head. Any grease and
contamination will shorten its life.
• Before transporting the printer, remove dye film & card hoppers and pack the printer in its original packaging to
reduce the likelihood of damage in transit. Magicard is not responsible for printers/items inadequately packaged.
CAUTION
Unapproved changes or modifications to the equipment could void the User’s authority to operate the printer and affect
any related warranty claim.
PLACE HOLDER - The printer has security label. Removal of the printer covers by unauthorised / untrained personnel and
removal or breaking of this label may result in your printers’ warranty being void. Internal maintenance & repair should
only be undertaken by an approved Magicard Technical Partner.
If using this printer in Germany:
To provide adequate short-circuit protection and over-current protection for this printer, the building installation must
be protected by a 16 Amp circuit breaker.
Bei Anschluß des Druckers an die Stromversorgung muß sichergestellt werden, daß die Gebäudeinstallation mit einem
16 A-Überstromschalter abgesichert ist.