（
V1.0
）
7
Started
3.6.
Connect receiver
Plug out the receiver from the side of this product, and insert to the devices with a standard USB
interface, and then switch machine keys
to the "ON" position, to complete the connection.
3.7.
Process of use
Type the left Qwerty keyboards you can use it as input device, moving on the touch pad can control the
cursor, do the same function as mouse. If you want to use the built-in laser pointer to highlight the
words/drawing, just switch on the micro-switch control at the side of product.
3.8.
How to control the backlit
There’re two ways to control the backlit – by software and by manual control mode.
When the connection is successful, backlit auto turn on, and will auto turn off after 3 seconds to save
power and increase battery life. If you want to turn on the backlit, just need to press the key
.
3.9.
Equipment sleep and wake-up operation
The device built into the auto-sleep function under certain circumstances, in order to save power and
increase battery life. Specifically for, when a user no longer operate buttons and touch pad for more than
three minutes, the device will automatically get into sleep mode - backlit turn off, leaving only the RF
indicator flashes.
In the sleep state, only need to click any button you can wake-up the device, the equipment will return to
the state before sleep.
3.10.
Switch off the device after use
When finished, push the switch
to the OFF position, cut off the power, turn off equipment.
The 2.4G USB receiver should be plug out from USB interface, and then insert back in the equipment,
keep safety.
3.11.
Battery Charging
The device with built-in lithium-ion battery, please use only approved data lines and chargers.
Содержание ProMini Keyboard
Страница 1: ... V1 0 1 ProMini Keyboard User Manual ...
