38
7. Move the cursor to Save & Exit Setup to save the option
you did, otherwise the old password will still be there
when you turn on your machine next time.
8. Press <ESC> to exit to the Main Menu.
Note:
If you forget or lose the password, the only way to
access the system is to clear the CMOS RAM by
setting JP2. All setup information will be lost and you
need to run the BIOS setup program again.
IDE HDD Auto Detection
IDE HDD Auto Detection detects the parameters of an IDE
hard disk drive and automatically enters them to the
Standard CMOS Setup screen.
The screen will ask you to select a specific hard disk for
Primary Master after you select this option. If you accept a
hard disk detected by the BIOS, you can enter ÒYÓ to
confirm and then press <Enter> to check next hard disk.
This function allows you to check four hard disks and you
may press the <ESC> after the <Enter> to skip this function
and go back to the Main Menu.
Save & Exit Setup
Save & Exit Setup allows you to save all modifications you
have specified into the CMOS memory. Highlight this
option on the Main Menu and the following message
appears:
SAVE to CMOS and EXIT (Y/N)? Y
Press <Enter> key to save the configuration changes.
HDD Low Level Format
Do not use this utility unless you have help from engineers
or some technical background.
