Page 12
5.6
Tilt in space seat option – if fitted
To operate the Tilt In Space Seat:
•
Bring your power chair to a complete stop on a flat level surface.
•
Always fasten the positioning belt when operating the Tilt In Space seat.
•
Push the ‘Accessory Mode Selection’ button on the DX2 joystick. Select Tilt In Space by
moving the joystick left or right. Once the Tilt In Space option is highlighted, moving the
joystick forward or backwards will operate the function.
•
Once the seat reaches its highest tilt angle, the tilt action stops; release the joystick at this
point.
•
Before driving, return the seat to its upright position. When returning to the upright position,
always be sure that the mechanism has reached its lowest limit or normal seated position.
WARNING! Never tilt the seat from its upright position on an inclined surface or
on bumpy or uneven surfaces. Never raise the Tilt In Space seat while your
power chair is in freewheel mode. Failure to heed this warning can result in the
power chair tipping over and causing personal injury.
STOP! Do not put your fingers, toes or anything into the tilt mechanism while it is
operating. Serious personal injury will occur.
5.7
Power elevating seat option – if fitted
The power elevating seat will allow more freedom and independence, by extending your level of
reach. The seat height can be adjusted to match a surface to which you are transferring. When
the seat is fully elevated, the user is closer to eye level of standing persons enabling more
enjoyable interactions.
Seat elevators are sometimes referred to as scissor lifts; this for good reason. Under no
circumstances should you put your hands, fingers, toes or any part of your body in the seat
elevator mechanism while it is operating. Be careful that nobody else has any part of their body
in the seat elevator mechanism while it is working.
To operate the power elevating seat:
•
Bring your power chair to a complete stop on a flat level surface.
•
Always fasten the positioning belt when operating the power elevating seat.
•
Push the ‘Accessory Mode Selection’ button on the DX2. Select power elevating seat by
moving the joystick left or right. Once the power elevating seat option is highlighted, moving
the joystick forward or backwards will operate the function.
•
Once the seat reaches its highest elevation, the action stops; release the joystick at this
point.
•
Before driving, always be sure that the mechanism has returned the seat to its lowest
position.
The power seat elevator is fitted with a system that reduces the speed of the power wheelchair
when the seat has been elevated a small amount.
WARNING! Fasten the positioning belt when using the seat elevator
WARNING! Never elevate the seat from its lowest position on an inclined
surface
WARNING! Never raise the seat when crossing bumpy or uneven surfaces
WARNING! Do not put the power wheelchair into freewheel mode with the seat
Содержание Extreme X8
Страница 1: ...Page 1 Owners Manual...
