www.flash-butrym.pl
Page
3
Use the same type and the same power of bulb (suggest to purchase it from
die dealer or the factory di reedy), install it according to the negative step.
When you install it, please don’t touch the glass part of bulb with hands and
oiliness things.
Note: While installing the bulb, both ending screws of bulb should be
tightened greatly, otherwise maybe get fire or damage the lamp.
Operation Description:
Please check if die power voltage is suit for the rated voltage first before
turning it on, high or low voltage both will influence the service life and the
effect of light, please necessarily stabilize the technique parameter of input
power voltage in use. In the area in which the voltage changes greatly, 220v
is suggested in order to meet the rated voltage of the light equipment. The
product is the top-protecting equipment the earth line should connects with
the earth perfectly. Insure the safe usage.
This lamp has die thermo-protect function and can switch on to postpone, the
host computer chip will need 30 seconds to start reset after turning on the
lamp;
Note: It is better to turn on the bulb first, then turn on the circuit board after the
bulb is turned on steady. (In order to avoid disturb the circuit due to high
voltage).
Main technique parameter
Item No
HW-B001
Bulb
HMI 1200
Rated voltage
AC220V-240V 50Hz- 60 Hz
Power consumption
1500W
Optical system
Concave Reflector Adjustable optical convex lens
Cooling system
Strong fans cooling system
Cover
The wreath oxygen sprays the paint
Motor
Control 5 mini-step motor through an internal micro-processing system
Function color
The vacuum plating glass 5 main color, mixed color+ open
Strobe description
7 class of adjustable strobe speed
Zoom in and Zoom out
Adjust Zoom via mini-step aperture
Control way
The front-panel controlling
Standard DMX512 signal controlling 4 DMX channels
Working environment
Indoor(20 *C
– 40 *C
