- Insert 2 new AA batteries of the same brand with correct polarity according to battery lid
indications.
- Close the battery compartment lid.
CAUTION:
1. Do not shorten the battery terminals.
2. Please do not mix new and old batteries. Use alkaline batteries or rechargeable batteries
only.
3. Please remove the batteries before any long period of non-use.
4. Do not dispose batteries in fire.
5. Do not throw damaged or discharged batteries into normal waste, but be careful for
environment and take them to collection points provided their recycling.
6. Keep batteries out of children reach.
OPERATION INSTRUCTIONS
- You can put the bowl on the scale even before switching the scale on. If you do so, the scale
will automatically switch on with the value 0.
- In case that you put the bowl on the scale after it has been switched on, press the
„TARE
/
ZERO“
button (weight reset). The display will show 0. You can then proceed with the required
measuring.
- Auto shut-
off occurs if display shows ‚0‘ or shows the same weight reading for
90 sec.
Operation
1.Put the scale on a suitable flat surface and switch it on using the ON/OFF button.
2. Put the bowl on the scale before switching it on. (Do not put things you want to weight
into the bowl before you turn the appliance on!)
3. After the scale is switched on, first of all it is calibrated. When the display shows 0, the
appliance is ready for weighing.
4. Using the
„MODE“
button set the required units of measurement.
5. Put the food (object) into the bowl. Then wait until the value on the display becomes
stable.
6. The scale can then be switched off by pressing the ON/OFF button or wait ca. 90 seconds
after which the scale switches off automatically.
„TARE“ function
- To weigh different loads consecutively without removing loads from the scale.
- Put first load on the scale, get weight reading.
-
Press „TARE / ZERO“ button to reset the display reading to „0“ before adding next load.
- Add another item and the display will read the added weight.
- You can repeat this operation.
- If all products are taken away from the bowl a negative value will appear on the display.
- ATTENTION:
Remove the excessive weight product from the scales to avoid damage to the
appliance.
