PRODUCT OVERVIEW
SETTING UP
Step 1:
Place the machine on a flat surface and in a suitable large area with at
least 50 cm open space around the machine.
Step 2:
Fill the fluid tank with MAGIC FX approved fluid.
Step 3:
Connect the machine to suitable rated power supply.
To determine the
power requirement for the machine refer to the label on the back of the machine.
Always connect the machine to a protected circuit and ensure it is
properly grounded to avoid risk of electrocution.
Step 4:
Turn on the machine and allow it to heat up. Heat up takes approximatly 5
mintues. Once the machine has reached operating temperature, the LCD display
will show “Ready To Fog”. Now the machine is ready for operation.
Step 5:
To start making fog, locate the OUTPUT
button on the control panel, and
press the
button to start making fog.
Step 6:
To turn off the machine, press STOP button and turn Powercon to the
OFF
position.
22 x 3W LED
(5R, 6G, 6B, 5A)
PowerCon
LCD Control Panel
Wireless Receiver
XLR 5-Pin DMX Connector
