MAGIC FX SMOKEBUBBLE BLASTER MFX1603, Руководство пользователя и инструкция по установке

Страница: 9 / 36

10 MAGICFX® SMOKEBUBBLE BLASTER — User and Installation Manual
1.6 DMX CONTROL
When connected to DMX and with Manual mode OFF the MAGICFX
®
SMOKEBUBBLE BLASTER is
controlled with 1 safety address and 4 operational addresses:
DMX Address Address range
Safety address 1 - 512
Start address (Bubble setting) 1 - 512
Start a 1 (Smoke setting) 1 - 512
Start a 2 (Fan speed) 1 - 512
Start a 3 (Go trigger) 1 - 512
DMX addresses
The safety address cannot be the same as (one of) the operational address(es). Operating of
these addresses results in the following:
DMX Address DMX Value (decimal) Result
Safety address
0 99 Device disabled
100 155 Device enabled
156 255 Device disabled
Start address
(Bubble setting)
0 127 50% bubble capacity
128 255 100% bubble capacity
Start a 1
(Smoke setting)
0 85 No smoke
86 170 50% of bubbles contain smoke
171 255 100% of bubbles contain smoke
Start a 2
(Fan speed)
0 9 Fan OFF
10 255 Minimal speed -> Full speed
Start a 3
(Go trigger)
0 199 Effect OFF
200 255 Effect ON
Operation of the DMX addresses
When you link multiple machines with DMX, we advise you to use the same safety address for all
machines.
CAUTION
Always plug in a DMX Terminator into the DMX output of the final unit in the
control sequence. Using a DMX Terminator improves signal reliability.