USB
2.0
VGA
A
DAPTER
User Manual
24
R
EGULATORY
C
OMPLIANCE
FCC
This equipment has been tested and found to comply with Part 15 / Subpart B of the FCC rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause undesired
operation.
CE
This equipment is in compliance with the requirements of the following regulations:
EN 55022: 1998+A1:2000+ A2:2003,
EN 55024: 1998+A1:2001+ A2:2003), (IEC/EN 61000-4-2 /-3)
C-Tick
This equipment is in compliance with the requirements of the following regulations:
EN 55022: 1998 + A1:2000+A2:2003, AS/NZS CISPR22 © IEC: 2005.
VCCI
This equipment is in compliance with the requirements of the following regulations:
V-3/2006.04,
T
ECHNICAL
R
EQUIREMENTS
V-4/2006.04,
S
UPPLEMENTARY TEST CONDITIONS FOR EQUIPMENT UNDER TEST
Disclaimer
Information in this document is subject to change without notice. The manufacturer does not make
any representations or warranties (implied or otherwise) regarding the accuracy and completeness of
this document and shall in no event be liable for any loss of profit or any commercial damage,
including but not limited to special, incidental, consequential, or other damage. No part of this
document may be reproduced or transmitted in any form by any means, electronic or mechanical,
including photocopying, recording or information recording and retrieval systems without the
express written permission of the manufacturer.
Copyright© 2011 Magic Control Technology Corporation. All rights reserved. All trade names are registered trademarks of their respective owners. Features
and specifications are subject to change without notice. Product may not be exactly as shown in the diagrams.