MULTIPOINT USB OVER LAN WORKSTATION M
WS9940
39
REGULATORY COMPLIANCE
FCC
This equipment has been tested and found to comply with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference
• This device must accept any interference received, including interference that may cause
undesired operation.
CE
This equipment is in compliance with the requirements of the following regulations:
EN 55022: CLASS B (2006),
IEC/EN 61000-3-2 (2006), IEC/EN 61000-3-3 (1995+A1:2001+A2:2005)
EN 55024 (1998+A1 :2001+A2 :2003), (IEC/EN 61000-4-2 (1995+A1:1998+A2:2001)
/-3 (2006)/-4 (2004)/-5 (2006)/-6 (1996+A1:2001)/-11 (2004))
C-Tick
This equipment is in compliance with the requirements of the following regulations:
EN 55022: CLASS B (2006), AS/NZS CISPR22 © IEC: 2005.
VCCI
This equipment is in compliance with the requirements of the following regulations:
CISPR 22 © IEC: 2005.
WEEE Information
For EU-member states:
The use of the symbol indicates that this product may not be treated as
household waste. Waste electrical and electronic equipment should be
appropriately collected and recycled as required by practices established for
your country. For the information on recycling of this product, please contact
your local authorities, your household waste disposal service or the shop
where you purchased the product.
KNOW FACTORS & NOTE
SCHOOL ENVIRONMENTAL AND BEHAVIOR MATRIX
MWS means to simplify operation and provide safety environment in the class room!
Teacher turn on computer first thing when the day begin, one button that turns on all station
power simultaneously and continue all day with auto-mapping enables each individuals
operation; turn off computer at end of date that shut down all station power as well.
When student walk in the classroom, he/she only needs simply turn on the monitor and log
in, then log out the workstation and turn off monitor after class; that leaves power idle thus
convenient next class enable fast log on. For safety reason, nobody has to touch any
device’s power or USB connector to avoid strange behavior that may cause electronic power
shock.