TROUBLE
CODE
POSSIBLE FAULT
WHAT TO DO
Water inlet system failure
Make sure the water inlet tap is open and water is flowing.
Separate the inlet hose from the tap and clean the filter of
the hose.
Contact for service if the error continues.
Pressure system failure
Contact for service.
Continuous water input
Close the tap and contact for service.
Inability to discharge water
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Heater error
Contact for service.
Overflow
Unplug the machine and close the tap.
Contact for service.
Faulty electronic card
Contact for service.
Overheating
Contact for service.
Divisor position error
Contact for service.
Faulty heater sensor
Contact for service.
High voltage failure
Contact for service.
FAULT CODES
FF
F5
F3
F2
F8
F1
FE
F7
F9
F6
HI
ADDITIONAL INFORMATION
AND TIPS
1. When the unit isn't in operation:
•
Disconnect the plug and close the tap.
•
Leave the door slightly open to prevent odor formation.
2. Select the dry option to remove standing water droplets.
3. Place dishes in the machine properly to get best results in cleaning and efficiency.
4. Rinse dirty dishes before placing them in the dishwasher.
5. Only use the Rinse program when necessary.
6. DO NOT install the unit near a refrigerator or freezer as it will reach high temperatures.
7. If the dishwasher is located in an area that is at risk of freezing, close the tap, disconnect the inlet
hose from the tap and drain the water inside the hose and the unit completely.
23
