7
BEFORE USE
Check that accessories are complete and the unit is not damaged. Do not fill the ground coffee until brewing
clean water up to the marker indicated “MAX” then pouring out the water; follow the steps below for one or
two times. Using warm water, thoroughly clean: carafe, carafe lid, funnel, filter.
Note
: the carafe lid is packaged separately. Before using, you must assemble the lid and
the carafe.
Assemble according to the following:
1.
Firstly remove the carafe lid from the package, and place the lid on the carafe;
make sure the two tubers on the lid are aligned with the groove of carafe.
2.
Then press the lid on the arrow position with a little force (see Fig.1); the
notches will be pressed into the groove. The lid is assembled on the carafe.
Fig.1
