8
CHANGING THE REVERSIBLE DOOR
CAUTION: To avoid personal injury to yourself and/or property, we recommend someone
assist you during the door reversal process.
Your refrigerator is built with a reversible door. You have the choice of either opening it from the left
or the right side. In order to reserve the opening direction of your door, please follow these simple
instructions:
1) Disassemble all the reversible components in the sequence as shown below (also refer to left
diagram above). Be sure to keep them well for later use in the process of reassembling.
(1) 2 decorative plugs on tabletop
(2) 2 screws to hold tabletop
(3) 2 screws on cabinet rear to hold tabletop
(4) tabletop
(5) 2 screws to hold top hinge
(6) top hinge
(7) door, freezer section
(8) 2 screws to hold mid hinge
(9) mid hinge
(10) door, refrigerator section
(11) 2 screws to hold bottom hinge
(12) leveling leg I
(13) bottom hinge
(14) leveling leg II
2) To access the bottom hinge assembly, you may tilt back the refrigerator cabinet or lay the
refrigerator on its back.
3) Reassemble the unit with the door hinges on the opposite side (see the right diagram above).
The sequence for reassembling is just in reverse order of disassembling.
4)
With the mid hinge not being fastened too tight, align two doors properly on the cabinet and then
fasten the mid hinge. If necessary, loosen the bottom hinge and the top hinge when aligning and
then fasten them tight.
