10
stand times by cycling on and off.
TIMER
You can use the TIMER function
independently, even while a cooking
program is going on in the oven.
NUMBER PADS(0-9)
Touch to set times or amounts.
CLOCK
Touch to set the clock.
RESET
Clears all previous settings if touched
before cooking starts.
START/STOP
Touch to start or stop cooking.
OPERATIO
OPERATIO
OPERATIO
OPERATION INSTRUCTIONS
N INSTRUCTIONS
N INSTRUCTIONS
N INSTRUCTIONS
BEEPS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the
entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock(one for
hour and two for minutes).
3. Touch CLOCK pad again.
NOTE:
This is a 12 hour clock. When the oven
is first plugged in or when power
resumes after a power interruption, the
display will show ENTER CLOCK TIME,
if you prefer to not have the clock
displayed, touch RESET pad. You can
check the clock time while cooking is in
progress by touching the CLOCK pad.
SETTING THE OVEN TIMER
1. Touch TIMER pad.
2. Enter the amount of time you want to
count down by touching the
number pads. Digit time is in minutes
and seconds and set left to right. Set
one digit (a 5 for 5 seconds) or up to
four digits (2405 for 24 minutes, 5
seconds).
3. Touch START/STOP pad.
NOTE:
·Time countdown can be seen in
display for 3 seconds before clock or
cooking time is returned to display.
·Touch TIMER and then touch RESET
to cancel TIMER during timing
process.
SETTING COOKING TIMES AND
POWER LEVELS
A. One-stage Cooking
1. Use the number pads to set a cooking
time. You can set a cooking time from
one seconds to 99 minutes and 99
seconds. If you are setting a time greater
than one minute, you must enter
