1
Before Putting Into Use
z
Before connecting the appliance to the power supply, let it stand for about 2 hours, which will
reduce a possibility of malfunctions in the cooling system due to transport handling.
z
Clean the appliance, and be thorough, especially in the interior (See “HOW TO CLEAN”).
z
In case the interior accessories are not correctly placed, rearrange them as described in
chapter “NAME OF THE PARTS”.
Instructions for Use
These instructions for use are intended for the user. They describe the appliance and its correct
and safe use. They were prepared for various types/models of refrigerators therefore you may find
in it description of some functions and accessories that your appliance does not have.
Tips for Energy Savings
z
Try not to open the door too often, especially when the weather is wet and hot. Once you
open the door, mind to close it as soon as possible.
z
Every now and then check if the appliance is sufficiently ventilated (adequate air circulation
around the appliance).
z
Set thermostat from higher to lower settings as soon as possible (depends on how loaded
the appliance is ambient temperature etc).
z
Before loading the appliance with packages of fresh foods, make sure they are cooled to
ambient temperature.
z
Ice and frost layer increase energy consumption, so defrost
the appliance as soon as the
layer is 1/4” thick.
