Step. 4
Insert the 2 bolts through 2 flat washers into holes on top cabinet floor.
Tighten screws to close the gap between top cabinet and the microwave oven.
NOTE: MICROWAVE OVEN MUST BE SECURED WITH TWO
MOUNTING BOLTS.
Dress power cord nearly in top cabinet.
Install the grease filters.
* Using filler block for recessed bottom cabinet Insert a bolt, with a 3/4”
washer into one of the holes drilled previously in the top cabinet floor.
(D & E on Top Cabinet Template.)
B. Vertical Ventilation System
B-4. Install the Damper
For the vertical exhaust open the top cabinet and attach the damper to the
microwave through the cabinet bottom. For front to back or side to side
adjustment, slide the damper as needed.
With the damper out, twist the damper to fit under the flaps of the blower plate.
Replace the damper and make sure it will move easily by the force of the exhaust
air.
Be sure to square the corners on the hinge ends.
After the microwave oven is installed, Pull the house duct down to conncet to the damper.
7
Cabinet
front
Top cabinet
mounting screw
Washer
Cabinet bottom shelf
Install the grease filters.
Microwave
oven top
Filter block
B-1. Ventilation motor
See the page 4, A-1. Ventilation motor, step 3.
B-2. Install the mounting plate
See the page 5, A-2. Install the mounting plate.
• You need not perform the step2 and step 4; Horizontal ventilation only.
B-3. Mounting Microwave oven
See the page 6, A-3. Mounting the Microwave oven.
