CARE AND CLEANING
CLEANING INSTRUCTIONS
Stop appliance and unplug the can opener when not in use and before
any cleaning.
Never immerse the can opener, cord, or plug in water or other liquids.
To insure proper sanitation, all removable parts on the can opener
should be detached and cleaned thoroughly in warm, soapy water at
regular intervals. Rinse and dry thoroughly.
To clean motor housing, wipe clean using a damp cloth.
Wipe off drive wheel with a damp cloth.
NOTE:
DO NOT place any parts of this unit in the dishwasher.
REMOVABLE BLADE ASSEMBLY
Blade assembly can be easily removed for cleaning and replaced when
done.
1. Stop appliance and unplug cord from wall outlet.
2. To detach the can opener lever from the unit:
a. Gently lift the can opener lever to the upright position.
b. Hold the can opener with one hand while gently pulling the
can opener lever away from the front of the unit with the
other.
3. To re-attach the can opener lever back on the unit:
a. Hold the can opener lever in the vertical position.
b. Insert shaft into the key hole near the drive wheel
and push the lever in all the way.
c. Rotate the can opener lever clockwise until
it is horizontal.
NOTE:
If lever is properly engaged, it cannot be removed from the can
opener when in horizontal position.
HINT:
Cutting mechanism may collect food or paper from can labels
and should be washed frequently.
MAINTENANCE
The motor and internal gears of your can opener unit are permanently
lubricated at the factory for lifetime service and require no further
attention. The cutting blade is made of hardened steel and will last for
years under normal use. Do not attempt to sharpen.
E6
E7
FPRVMCCO01_12ESM1.indd 8-9
3/27/12 4:15 PM