background image

To set oven for immediate start:

1. Press COOK TIME pad.

S

0 HR:00 will appear in the display and SET COOK
TIME will flash in the display.

2. Turn the SET knob to enter the cooking time.

S

The display will show cooking time in HOURS:MIN-
UTES. Cooking time can be set from 10 minutes
(0:10) up to 11 hours and 55 minutes (11:55).

S

If you delay in entering the cooking time, the pro-
gram will automatically cancel and the time of day
will reappear in the display.

S

If you set the cooking time but delay in entering the
oven temperature, beeps will sound and the display
will flash SET BAKE and 000

°

.

3. Press OVEN TEMP pad.

4. Enter oven temperature with the SET knob.

S

If you press the OVEN TEMP pad but delay in en-
tering the temperature, the program will cancel and
the display will return to the time of day.

5. Press CLOCK pad and the time of day will reappear

in the display. TIMED BAKE ON indicator words will
remain in the display to show that the oven has been
set for Automatic Oven Cooking.

6. After a few seconds, the oven will turn on and the dis-

play will begin to count down.

7. At the end of the preset cooking time, the oven will au-

tomatically turn off,

“End”

will appear in the display

and 3 beeps will signal the end of cooking. Continuous
beeps will prompt you to remove food from the oven.

8. Press STOP/CLEAR to cancel the beeps and remove

food from the oven.

To set oven for delayed start:

1. Press COOK TIME pad.

S

0 HR:00 will appear in the display and SET COOK
TIME will flash in the display.

2. Turn the SET knob to enter the cooking time.

S

The display will show cooking time in HOURS:MIN-
UTES. Cooking time can be set from 10 minutes
(0:10) up to 11 hours and 55 minutes (11:55).

3. Press STOP TIME pad.

S

SET STOP TIME will flash in the display.

4. Turn the SET knob to enter the stop time.

S

If you delay in entering the stop time, beeps will
sound and the display will flash SET BAKE and
000

°

.

5. Press OVEN TEMP pad.

6. Enter oven temperature with the SET knob.

7. Press CLOCK pad to return the current time of day to

the display. DELAY BAKE and the preset oven tem-
perature will appear in the display to show that the
oven has been set for a delay start cooking operation.

8. The oven will automatically turn on at the preset time

and TIMED BAKE ON will appear to indicate that the
food is cooking.

9. The oven will automatically turn off at the preset stop

time.

“End”

will appear in the display and continuous

beeps will signal the end of cooking.

10.Press STOP/CLEAR to cancel the beeps and re-

move food from the oven.

PAGE 11

Additional Information

If you delay more than 30 seconds between touching a
pad and turning the SET knob, the display will either re-
turn to the previous setting or the time of day will reap-
pear and the program will cancel.

To recall

the preset stop time or cook time, just press

the corresponding pad.

To reset

or cancel the program, press the STOP/

CLEAR pad.

At the end of the cooking operation, continuous beeps
will sound until the STOP/CLEAR pad is pressed.

Содержание 6898XVB

























Отзывы: