17
13. Recalling Values from Memory
1.
The Monitor has two Memory Zones (1 and 2).
Each
zone can store up to 50 measurements.
2.
To read memory values from a selected Memory
Zone, use the
“User-Switching Key”
to select a
Memory Zone (1 or 2) from which you want to recall
values from. Then, press the
“M”
key, and the
values will be shown on the LCD display with an
assigned memory sequence number.
3. The monitor will display an average of the
previous measurements first.
Every new press of
the
“M”
key calls for one set of prior values stored.
Latest memory will be recalled first.
The calculated average will be applied to a
maximum of the last 3 memories.
14. Clearing Values from Memory
1.
Press the
User-Switching key
to select the memory
zone 1 or memory zone 2.
2.
Continue to press the “
M
” key for approximately 5
seconds, then the data in the pre-designated
memory zone can be erased automatically.
Press “M” key for
5 seconds to
clear all
memories.
Note:
The data in both memory zones
(zone 1 and zone 2) can be erased if any of
the batteries is moved away.
Suggest the users to first record the data on
the Blood Pressure Log (See page 21, 22)
before replace or move away the batteries.
M
Me
ed
diia
a
3
Minipulsar Ing. 12-09-2008 10:31 Pagina 7
Содержание Minipulsar
Страница 1: ...I GB ...
Страница 24: ......
