ATTENTION
The next step requires
TWO people,
do not attempt this on your own!
Before you use your new whiteboard for the
first time make sure you clean all the panels
thoroughly.
If you have any further enquiries on how to fit
your whiteboard please contact our customer
service team.
Place the base plate (D) on the floor and
line up the four holes with the holes in the
bottom centre pole (I).
Fasten the two together using the M5 bolts
(E), ensuring that the bolts are fastened
tightly together using allen key (K).
Whilst holding the pole collar in place,
together, lift the assembled board and slot
the top half of the centre pole inside the
bottom half of the centre pole.
Once you have completed this you should
have a fully functional rotating 3 sided
whiteboard.
ST
EP
SI
X
ST
EP
S
EVEN
PL
EA
SE NO
TE
CARE
FULLY
LIFT
Create,Shape & Communicate
www.magiboards.com
|
01952 292111
|
|
pg 4
Rotating 3 Sided Magnetic Whiteboard Assembly Instructions Sheet
Don’t forget to
hold the pole
collar whilst
assembling
INST_ROTATE301
