Magewell ULTRA STREAM, Руководство пользователя, Страница: 8 / 59

Descriptions of indicators status are as follows. The indicators are located on
the device panel as shown in
Interfaces .
HDMI/SDI IN
Ethernet
Wi-Fi
USB
REC REC
LIVE LIVE
Descriptions of multiple indicators status are as follows.
Indicators
On: input signal is detected.
■
Pulsing slow: input signal is not detected.
■
On: Ethernet is connected.
■
Pulsing slow: Ethernet is disconnected.
■
On: network is detected.
■
Pulsing slow: network is not detected.
■
Flashing: the encoder is connecting to Wi-Fi.
■
On: USB is available.
■
Pulsing slow: USB is unavailable.
■
Flashing: there is insufficient storage on the USB.
■
On: the encoder is under recording.
■
Pulsing slow: input signal is not detected.
■
Off: the USB flash drive is unavailable.
■
Flash once and then restore to its former state: recording failed.
■
On: the encoder is streaming to at least one streaming address.
■
Pulsing slow: at least one streaming server is configured.
■
Flashing: the encoder is connecting to at least one streaming address.
■
Off: neither of the stream servers are configured.
■
Flashes once and then restore to its former state: live streaming failed to
start.
■
The indicator lights flash in turn from HDMI/SDI IN to LIVE: system is
booting up.
■
The indicator lights flash in turn from LIVE to HDMI/SDI IN: firmware is
updating.
■
All indicator lights flash once simultaneously and then flash in turn from
HDMI/SDI to LIVE: the encoder is rebooting.
■
All indicator lights flash once simultaneously and then restore to their
former state: in the device list of Ultra Stream app, choose an encoder and
tap the device status icon at the upper right corner, and all the indicators on
that encoder will light.
■
If any other status appear, please try to unplug and re-plug in the
power cable to your encoder.

8